Arctic Cat 400 3in1 Скачать руководство пользователя страница 16

Страница: 16 / 80

��

ATV-CHECKLIST

Steering system

Turn the handlebars completely to

the right/left – there must be no

resistance. All parts of the steering

system must be properly fixed. No

play is allowed and steering has to

move freely.

Brakes

Check the brake fluid level. Push

the hydraulic brake lever several

times. Check the lever for tightness

and maneuverability. Test the park-

ing brake:

The wheels must lock when the

parking brake is engaged. Check

the brake linings for signs of wear.

Tire Pressure

Make sure that each tire has the

right pressure. Check the state of

the tires: tread (at least 1,6 mm for

road tires/ at least 3mm for off-road

tires).

Fuel

Check the fuel level in the tank and

the fuel pipes. Make sure that the

filler cap is closed.

Lights

Inspect all lights (full beam and low

beam light).

Engine Oil

Check the oil level at the inspection

window (250/300) or with the oil

level stick (400/500) and, if neces-

sary, fill some engine oil into the

crankcase.

Transmission Oil

Check the oil level in the front differ-

ential (model 4x4) as well as in the

rear differential (model 400/500).

Throttle

Push the throttle control several

times and check if it returns easily

and rapidly into its original position

(there should be some play).

Gearshift Pedal and Reverse
Lever

Inspect the gearshift pedal and

make sure that you can shift into all

gears without problems. Examine

the reverse lever and see if it moves

freely and engages properly.

Follow these steps to start it up:

1. Inspect the vehicle following the

check list.

2.Test the hydraulic brake sys-

tem by pushing the pedal several

times.

3. Engage the parking brake.

!! WARNING !!

Never start the vehicle if the brake

systems don’t work properly (if the

brake lever is loose, if there’s not

Page 14

ENGLISCH

21.05.2006, 14:44 Uhr

Содержание 400 3in1

















































































Результаты поиска

Содержание 400 3in1

Отзывы:

Похожие инструкции для 400 3in1

Бренды по названию

Популярные бренды

Arctic Cat 400 3in1, Руководство пользователя

Результаты поиска

Содержание 400 3in1

Отзывы:

Похожие инструкции для 400 3in1

Бренды по названию

Популярные бренды