Arctic Cat 2015 Pantera 7000, Руководство по обслуживанию

Страница: 113 / 206

111
PC230A
PC233A
9. Place a shop towel under the coolant feed hose and
oil return hose; then using a suitable clamping
device, clamp off the coolant hose. Loosen the hose
clamps and disconnect the hoses from the 9000.
PC236
10. Remove the three lock nuts and washers securing the
bracket of the turbocharger to the engine; then loosen
the lock nuts securing the mounting bracket to the
turbocharger.
PC234A

NOTE: If the oil hose has to be removed from the
engine, note the banjo bolt securing the hose to the
turbocharger has the smaller feed holes.
11. Remove the lock nuts and washers securing the
exhaust manifold to the cylinder head; then carefully
remove the turbocharger and exhaust manifold
assembly.
12. Remove the cap screws securing the lower heat
shield to the exhaust manifold and turbocharger; then
remove the mounting bracket.
13. Remove the lock nuts securing the turbocharger out-
let; then remove the turbocharger outlet from the tur-
bocharger and account for the gasket.
14. Remove the four lock nuts securing the turbocharger
to the exhaust manifold. Account for the gasket and
flat washers.
INSPECTING
1. With the exhaust pipe removed, inspect the turbine
(exhaust) blades for any signs of wear or damage;
then inspect the compressor (intake) blades.

NOTE: If any damage to the compressor or turbine
blades is present, the turbocharger must be replaced.
TZ093A
2. Inspect the waste gate linkage for signs of wear or
damage.
INSTALLING
1. With the turbocharger secured in a suitable vise and
the gasket in place, secure the exhaust pipe to the tur-
bocharger with the washers and lock nuts. Tighten
the lock nuts to 15 ft-lb.