Arctic Cat 2011 ATV 90 Скачать руководство пользователя страница 51

Страница: 51 / 68

DIVISION

II - OPERA

ION/

MAINTE

NAN

Spark Plug

The ATV comes equipped with a specified spark plug. See the specifica-

tions chart for the correct spark plug. A light brown insulator indicates that

the plug is correct. A white or dark insulator indicates that the engine may

need to be serviced or the carburetor may need to be adjusted.
Consult an authorized Arctic Cat

ATV dealer if the plug insulator is

not a light brown color. To help

prevent cold weather fouling, make

sure to thoroughly warm up the

engine before operating.
To maintain a hot, strong spark,

keep the plug free of carbon.
Before removing the spark plug, be

sure to clean the area around the spark plug. If you do not, dirt could

enter engine when removing or installing the spark plug.
Adjust the gap to 0.6-0.7 mm

(0.024-0.028 in.) for proper igni-

tion. Use a feeler gauge to check

the gap.
When installing the spark plug, be

sure to tighten it securely. A new

spark plug should be tightened 1/2

turn once the washer contacts the

cylinder head. A used spark plug

should be tightened 1/8 - 1/4 turn once the washer contacts the cylin-

der head.

Engine Idle RPM Adjustment

To properly adjust the idle, a tachometer is necessary. If one is not

available, take the ATV to an authorized Arctic Cat ATV dealer.

To adjust idle RPM:

1. Start the engine and warm it

up to normal operating tem-

perature.

2. Turn the idle adjustment screw

in or out until the engine idles

at 1700 RPM.

Throttle Cable Adjustment

The throttle has been adjusted at the factory, and no adjustment

should be necessary. If adjustment is necessary, the following proce-

dure should be followed:

1. Pull back rubber boots to

access cable adjustment nut.

2. Loosen jam nut to allow

cable adjustment nut to be

adjusted.

3. Turn cable adjustment nut

clockwise to increase free-

play in the cable. Turn the

adjustment nut counter-

clockwise to decrease free-

play in the cable.

4. There should be approxi-

mately 6 mm (1/4 in.) free-

play in the cable.

5. Tighten the jam nut to

secure the adjustment.

ATV-0051

ATV0052A

! WARNING

Adjust the idle to the correct RPM. Make sure the engine is at
normal operating temperature before adjusting the idle RPM.

KM004A

KM070A

KM071A

Содержание 2011 ATV 90





































































Результаты поиска

Содержание 2011 ATV 90

Отзывы:

Arctic Cat 2011 ATV 90, Руководство оператора, Страница: 51 / 68

Результаты поиска

Содержание 2011 ATV 90

Отзывы: