![Arctic Cat 2010 1000 H2 TRV Скачать руководство пользователя страница 82](http://html.mh-extra.com/html/arctic-cat/2010-1000-h2-trv/2010-1000-h2-trv_operators-manual_2965263082.webp)
80
10. Clean any dirt or debris from
inside the air filter housing. Be
sure no dirt enters the carburetor
(400).
11. Place the filter in the air filter
housing making sure it is properly
in position and seated; then install
the cover and secure with the fas-
teners.
AIR FILTER HOUSING
DRAINS
Inspect the “duck bill” drains beneath
the main housing for debris and for
proper sealing.
KX045A
DRAINING V-BELT
COVER
NOTE: If the ATV has been
driven through water, the V-belt
cover must be drained of any
water.
1. Place the ATV on a level surface.
2. Remove the drain bolt from the
cover and allow the water to drain
out.
CF110A
3. Shift the range lever to the neutral
position; then start the engine.
4. Increase and decrease engine RPM
several times to “blow out” any
water; then stop the engine.
5. Install the drain bolt and tighten
securely.
NOTE: The V-belt and clutches
should be inspected every 500
miles and the belt replaced (if nec-
essary).
TIRES
CAUTION
A torn air filter can cause damage to
the engine. Dirt and dust may get
inside the engine if the element is
torn. Carefully examine the element
for tears before and after cleaning it.
Replace the element with a new one
if it is torn.
CAUTION
The drain on the right side of the
housing is on the “clean air” side of
the air filter. Any leak in this drain
will allow unfiltered air to enter the
engine. Severe engine damage
could occur.
! WARNING
Always use the size and type of tires
as specified. Refer to the specifica-
tions chart for proper tire inflation
pressure, and always maintain
proper tire inflation pressure.
Содержание 2010 1000 H2 TRV
