65
GENERA
L INFOR
M
A
T
ION
Since gasoline expands as its tempera-
ture increases, the gas tank must be
filled to its rated capacity only. Expan-
sion room must be maintained in the
tank particularly if the tank is filled
with cold gasoline and then moved to a
warm area.
ATV-049D
Allow the engine to cool before filling
the gas tank. Care must be taken not to
overfill the tank. If overfilled, gas may
leak onto the engine creating a fire haz-
ard.
Tighten the gas tank cap securely after
filling the tank.
BREAK-IN PROCEDURE
After the completion of the break-in
period, the engine oil and oil filter should
be changed. Other maintenance after
break-in should include checking of all
prescribed adjustments and tightening of
all fasteners. At the discretion and
expense of the owner/operator, the ATV
may be taken to an authorized Arctic Cat
ATV dealer for this initial service.
Engine
New vehicles and renewed engines
require a “break-in” period. The first
month is most critical to the life of this
ATV. Proper operation during this break-
in period will help assure maximum life
and performance from the ATV.
During the first 10 hours of operation,
always use less than ½ throttle. Varying
the engine RPM during the break-in
period allows the components to “load”
(aiding the engine/transmission compo-
nent mating process) and then “unload”
(allowing components to cool).
Although it is essential to place some
stress on the engine components during
break-in, care should be taken not to
overload the engine too often. Do not
pull a trailer during the break-in period.
When the engine starts, allow it to
warm up properly. Idle the engine sev-
eral minutes until the engine has
reached normal operating temperature.
Do not idle the engine for excessively
long periods of time.
Brakes
Brake pads must be burnished to
achieve full braking effectiveness.
Braking distance will be extended until
brake pads are properly burnished.To
properly burnish the brake pads, use
the following procedure:
! WARNING
Do not overfill the gas tank.
CAUTION
TO PROPERLY BURNISH THE
BRAKES, USE FOLLOWING PRO-
CEDURE:
• Choose an area sufficiently large
to safely accelerate to 30 mph
and brake to a stop.
• Accelerate to 30 mph; then com-
press brake lever to decelerate to
0-5 mph.
• Repeat procedure 5 times until
brakes are burnished.
! WARNING
Do not attempt sudden stops or put
yourself into a situation in which a
sudden stop will be required until
the brake pads are properly bur-
nished.
Содержание 2010 1000 H2 TRV
