ARC'TERYX BORA PACK, Руководство пользователя

Страница: 25 / 203

24
INSTALLING THE HIPBELT
WARNING! Always ensure that the TPU bumper on the
RotoGlide™ slider of the hipbelt is inserted into the rails towards the
top of the pack. This TPU bumper prevents the rail and slider from
making a clicking noise each time they touch while using the pack.
STEP 1
Lay the pack on a flat surface with the back panel facing you, hold
the hipbelt and orient the RotoGlide
™
slider so that the TPU bumper
is inserted first into the rails.
STEP 2
Push the slider into the rail until you hear a click, as it completely
passes the latch.
STEP 3
Test your installation:
• Make sure the slider moves freely along the back panel
towards its top and bottom
• Make sure it’s securely attached. If you lift the hipbelt,
the pack should lift too.
STEP 4
Thread the webbing through the hipbelt load stabilizer buckles on
both sides of the hipbelt, the same way they were unthreaded.
Make sure there are no twists in the webbing.