Arcteq AQ-01 Скачать руководство пользователя страница 44

Страница: 44 / 75

NOTE!

TE!

Use a strong, non-LED light source (such as a xenon or a halogen lamp) for light channel

activation. There are three sensitivity level options for light sensors (please refer to Chapter

13, "Order codes"). The less sensitive the sensor is, the stronger the light source must be. If

the light activation lasts longer than three (3) seconds, the device initiates a self-supervision

error. For more information please refer to Chapters 10 ("Troubleshooting") and 6.1.1 ("LED

indicators").

7.4 Activation of outputs (tripping)

The activations of output relays, of electrical binary outputs and of high-speed outputs are dependent

on on the application scheme of the device. Please refer to Chapter 5.3 ("Protection scheme logics")

and to Chapter 6.1.1 ("LED indicators").

NOTE!

TE!

The activation mode of the outputs (light-only or light + current) is selected with the DIP

switches; see Chapter 5.1 ("DIP switches").

7.5 Testing

The functionality of sensors and sensor channels can be tested in light-oly mode, or in light and current

mode. You can also test the CBFP function.

Please see the AQ 100 series unit manuals (in English) for more detailed instructions on testing.

AQ 100 (Siemens)

Q 100 (Siemens)

Instruction manual

Version: 1.00

Содержание AQ-01











































































Результаты поиска

Содержание AQ-01

Отзывы:

Бренды по названию

Популярные бренды

Arcteq AQ-01, Инструкция по эксплуатации

Результаты поиска

Содержание AQ-01

Отзывы:

Бренды по названию

Популярные бренды