10
The system support OTA to change Pager’s ID.
1.
Press FN
2.
Press A2/CHG-ID
3.
Enter #(# = Pager ID number)
4.
Press ENT
When Change ID over-the-air (OTA) command paging is received:
The Staff pager will beep one time and return back to charging mode
※1：
How does the staff pager into programming mode:
Press the “stop” button then put the staff pager into charger.
Release the stop key until the pager into programming
mode--the pager’s indicator LED – Green and Red LED will
alternate blinking
Replace a Battery Pack
How to replace Ni-MH battery
1.
Screwed the back cover of the SP-01 pager
