Before you begin, verify the ship kit includes the following installation hardware
n
Two power cords
n
4-post rack mounting hardware (shown below)
n
A pair of 2-post quick rail assemblies (shown below)
Arcserve
UDP
8300 and
UDP
8400 Appliance Hardware Installation Guide
7
5.
Unpacking the Appliance
The 4-post (19-inch) quick rail assembly consists of:
n
A pair of adjustable fixed, quick rack rail assemblies (including a sliding rack rail) that attach directly to the rack.
n
A pair of inner fixed chassis rails that attach to the appliance (these must be removed from each of the
quick rail assemblies).
(Two) M4x 6
Phillips flat head
screws
(Eight) M5 x 12
cone washers
(Four) Round to square hole
converter brackets
(Two) M5 x 20
Philips truss head
screws
(Eight) M5 x 12
Philips flat head
screws
NOTE:
Use the hardware supplied
with your specific rack if different from
the hardware supplied in this kit.
INSTALLATION HARDWARE
ALTERNATE INSTALLATION HARDWARE (Round Hole rack )
Sliding rack rail
(part of quick rail assembly)
Adjustable, fixed quick rail assembly
(attaches directly to the rack)
Inner fixed chassis rail
(removes from rack rail assembly)
1. Press the middle
rail toward the chassis
with thumb.
2. Aim the inner
rail into the middle
rail until fully seated.
2
1
CAUTION!
The chassis is heavy.
The installation procedure
requires minimum of 2 people.
R
Rev. B
Need Rev. B inner rail
Complete chassis and adjustable rack rail assembly (inside view)
Complete chassis and adjustable rack rail assembly (outside view)
