Arcserve
UDP
8100 and
UDP
8200 Appliance Hardware Installation Guide
8
Adjustable rack rail assemblies
4-post rack
Empty
hole
Empty
hole
Empty
hole
Rear section of
the adjustable
rack rail assembly
Rack bracket tab
Rack bracket tabs
Front section of
the adjustable
rack rail assembly
6A. 4-Post Rack Installation with Standard Rails
Locate the mounting hardware and rack rail assemblies shown below
Step 2
n
Insert a cage nut
i
nto each of the square
holes
i
n the rack you w
i
ll be us
i
ng as
shown (three
i
n the front and two
i
n
the rear). They cl
i
ck
i
nto place.
n
A
ttach the rack /ra
i
l asse
m
bl
i
es to the
rack us
i
ng two M5 x 12 flat head screws
cone washers
i
n the front and back. The
convex s
i
de of the cone washers face toward
the rack.
n
Make sure the rack / ra
i
l asse
m
bl
i
es and
screws are al
i
gned
i
n the rack not only
i
n
the front and back, but are level
i
n he
i
ght
on the left and r
i
ght s
i
des for proper
al
i
gn
m
ent for appl
i
ance
i
nstallat
i
on.
Step 1
Locate the two adjustable standard
rack rail assemblies.
n
Insert the tabs on the front sect
i
on of the
ad
j
ustable rack ra
i
l asse
m
bly through the
open
i
ngs
i
n the rear sect
i
ons of the
asse
m
bl
i
es.
n
Check to
m
ake sure the ad
j
ustable rack ra
i
l
asse
m
bl
i
es are connected correctly, then
sl
i
de the front sect
i
on forward and the rear
sect
i
on back to keep the
m
fro
m
co
mi
ng
apart. These asse
m
bl
i
es ad
j
ust to
acco
mm
odate d
i
fferent rack depths.
NOTE:
The installation procedures
for
Sections 6A and 6B, 4-Post
Rack,
below and on page 9 are for
use with the rails and hardware
provided in your ship kit. If different
style rails are being used, or if your
rack requires different hardware,
refer to the instructions provided
with your rail’s or rack’s ship kit.
