Quick-mount rack rail assembly, inside view
Quick-mount rack rail assembly, outside view
Adjustable front quick-mount rack rail assembly
(attaches to the front of the rack)
Adjustable rear quick-mount rack rail assembly
(attaches to the rear of the rack)
Arcserve
UDP
8100 and
UDP
8200 Appliance Hardware Installation Guide
7
5.
Unpacking the 4-Post Rack Installation Assemblies
Verify that the ship kit includes one of the following installation assemblies
Installation Assembly A - Standard Rail Assemblies with Mounting Hardware
n
Two power cords
*
n
One set of 4-post rack mounting hardware
**
n
One pair of 4-post rack sliding chassis rail rack assemblies that attach directly to the rack
Installation Assembly B - Quick Mount Rails (for use in 4-post racks with square holes only)
n
Two power cords
*
n
Two 10-32 x 3/4” Phillips pan head screws
**
n
One pair of adjustable quick-mount rack rail assemblies (requires no additional mounting hardware or tools)
Rack rail assembly, outside view
Rack rail assembly, inside view
Adjustable front rack rail assembly
(attaches to the front of the rack)
Adjustable rear rack rail assembly
(attaches to the rear of the rack)
(Eight) M5 x 12
Phillips flat head screws
(Two) 10-32 x 3/4”
Phillips pan head screws
(used to secure the appliance in the rack)
(Eight) M5 x 12
cone washers
(Ten) M5
cage nuts
NOTE:
Use the hardware
supplied with your specific
rack if different from the
hardware supplied in this kit.
NOTE:
Only two power cords
will be included in your ship
kit even if you receive
multiple rail kits.
NOTE:
There may be
additional mounting hardware
included that will not be
used with this installation
assembly kit.
*
**
(Two) 10-32 x 3/4”
Phillips pan head screws
(used to secure the appliance in the rack)
