Arcon WORKHORSE 300S, Руководство по эксплуатации

Страница: 14 / 33

13
3.5 F
USES
It is recommended that input fuse sizes be in accordance with the table below:
Input Voltage Welder input
Maximum Amperage Recommended Fuse
Capacity
240 V Three-Phase 37 35
240 V Single-phase 45 50
400 V 25 25
480 V 20 25
575 V 18 25
Table 3.0
3.6 O
UTPUT CONNECTIONS
The standard supplied output connector types are female Dinse type (manufactured by
DIX). Special order welders may have been supplied with optional connector types
(Tweco or Cam-Lok) if special ordered.
There are several manufacturers of electrode holders, TIG torches (either air or water
cooled) and ground clamps. They are often current and use specific, and customers
should use care in determining the accessories that they will require. Always consult the
manuals or instructions provided with these accessories to ensure safe use and that the
connections are properly made.
3.7 Front Panel Mounted Digital Meter (optional)
The Digital Meter provides real-time Voltage and Current (switchable) output readings.
The front panel meter can be switched into two modes by pressing the black mode button:
1. Output Voltage of the welder in real-time.
2. Output Current of the welder.
During welding, the meter shows the current that is being delivered.
When welding stops, the meter will show the last Current that was delivered for a
period of 3 seconds, and then revert back to real time.