ArchWork ARCTAB, Руководство пользователя

Страница: 15 / 20

5
ARCTAB
BLOCCO
CONNETTORI
DMX+
POR
T 1
POR
T 2
POR
T 3
POR
T 4
DMX
-
POWER GROUND
DMX
GROUND
POWER DC
+
XLR: 1 = Massa
2 = DMX-
3 = DMX +
DMX
POWER
Fig.3
- 2 - INSTALLATION
2.1 MOUNTING
The ARCTAB controller can be installed in any standard electrical backbox. If you use a double size box, you
can insert the power supply inside.
• Mount the back side of the interface on the wall with 2 or more screws.
• Plug the 2 connectors (green connector block, fig.3).
• Close the interface, using one screw.
2.2 CONNECT THE WIRES
• DMX: Connect the DMX cable to the lighting receivers (Leds, Dimmers, Fixtures..)
(for XLR: 1=ground 2=dmx- 3=dmx+).
• Connect a 9V DC 0.65A. Be sure to not invert the + and the ground.
NOTE - PORT 1,2,3,4 : If your application need to have some external contact closures, make the contacts
between the ground and the ports.
Follow the wiring diagram as shown in figure.