ArchWork ARCGROUND3RGB, Руководство пользователя

Страница: 26 / 36

ARCGROUND3TRI/9TRI/3RGB/6RGB/9RGB 8
- 3 - FUNCTIONS AND SETTINGS
3.1 Operation via ARCMAT controller
After making the connection ARCGROUND3TRI/9TRI/3RGB/6RGB/9RGB supply (230V ~ 50Hz), connect the
unit to the external controller ARCMAT through the signal cable (4).
(For more information on the operation of the controller ARCMAT consult the instruction manual).
Power
............
ARCMAT
1
3
2
DMX - OUTPUT
XLR socket
Pin1 : GND - Shield
Pin2 : - Negative
Pin3 : + Positive
Pin1: GND - Shield (Black)
Pin2: - Negative (Green)
Pin3: + Positive (Red)
SIGNAL CONNECTOR
NOTE
• Connect the DMX coder to the units in series.
• All connected units will be set with the same information.
• Set corresponding DMX address, Personality, Calibration and Dimmer of fixture through the DMX coder.
• A maximum of 20 units in series can be set by the DMX Coder at the same time.
Fig.8