Archtek telecom 5634BIF, Руководство пользователя

Страница: 9 / 49

5634BIF User’s Manual
9
LINE J A CK
J A CK
J A CK
J A CK
S PK
M IC
PHONE
Fax machine
5634BIF
Figure 1-5. Completed modem installation
If you connected the modem to a computer, place the computer into terminal mode and
complete the configuration information required by the software. Refer to your computer
manual to find out the appropriate command to use.
Then use the following procedure to verify that your connections:
1. Type AT and press the Enter key. If your system is operating properly, your modem
sends an OK response to your screen and wait for your next command.
If you did not receive a response, make sure your computer is sending commands to
your modem. If this does not solve your problem, contact your computer dealer.
2. Use your communication software to prepare your computer to dial a call. Then type
AT D x phone number , where x is either T for touch-tone dialing or P for pulse dialing
and phone number is the telephone number that your modem is using.
For example, if your modem is connected to the telephone line 555-2121 and Touch-
Tone dialing is supported in your calling area, type
ATDT 5552121 .
3. Press the Enter key. You should receive a BUSY response and you should hear the
busy signal through the modem speaker because the modem is calling itself.
Your modem is now ready for operation. Refer to the manual that came with your
communication software to begin communications. If you will be communicating directly
with your modem, or if you want to find out more about the modem's operation, proceed to
Chapter 2.
−
When you turn off your computer, the modem will turn off automatically. It will turn
on again when you turn on the computer.