1
TV Cradle Description
By installing the TV cradle, you have an easy way to connect and disconnect your AV400 or PMA400 to or
from your home entertainment system. Simply slip your Archos device into or take it out of the TV Cradle as
needed. If you have scheduled television recordings to make, then just slip it into the cradle, turn it on, and
let it make the recording while you are away. If you want to make TV recordings from a place other than
where your TV Cradle is connected, then you can purchase the “Audio-Video Travel Cable” to bring along with
your Archos device and record from any other audio/video source.
a Multi-connect Plug: Connects to the AV device’s multi-connect jack.
b Rotating mount: Allows the AV device to be viewed at
a 60 or 90 degree angle.
c Device Slot: the slot to place the AV device into.
d Rubber
fi tting shoe: size varies slightly depending on
which AV device you have.
e Stylus from the PMA400 for the touch screen.
f DC-In power jack: Plug only the included Archos
adapter/charger into this jack.
g Infrared out: Connect the IR emitter here.
h Serial connection: For future use.
i AV OUT: The audio and video cables OUT from your AV device. Goes to TV INPUTS.
j AV IN: Connectors to get Audio and Video IN to your AV device. Goes to TV tuner OUTPUTS.
k* S-Video IN: Used to get high quality S-video into your AV device. Goes to TV tuner S-video OUT.
3
l Infrared receptor: Point your Archos remote control at this surface to
control your AV device.
*Attention: Do not connect both the S-video IN and the yellow Video-IN at the
same time.
4
