5
(Fig 2.5)
7) Click “Next” to finish the procedure.
+
(Fig 2.6)
8) The system should now detect the hardware and run the “Add
New Hardware Wizard” to assist you in setting up the new
device, fellow the system message to finish the driver
installation.
9) After installing the ARCFlash, the “Remove disk” symbol
should appear in “My computer”.
2.2 Security software installation
(If the user wishes to use the security function, it will be necessary to install the security software under Win98/SE/ME/2000/XP.)
2.2.1 Security software installation under Win98/SE
1) Turn on the write-protection switch of the ARCFlash before use. The figures “Key” indicates writable and “Lock” indicates write-protected.
2) Start up Windows 98SE and insert the driver disk into the CD-ROM. Run “security/setup.exe” on the driver CD. Follow the system messages to
complete the security software installation and then restart the computer.
3) Replug in the ARCFlash after installing the security software. The system should automatically detects the device and setup the security
function. The UFD Utility icon should appear under programs and the taskbar.
(Fig 2.7)
(Fig 2.8)
