Archgard 3600-dvtr24n, Руководство пользователя по установке, эксплуатации и техническому обслуживанию, Страница: 30 / 42

Optima/ag
3600
30
Regularly:
❖
Clean and remove any lint accumulations or debris from the grills and in any combustion and
convection air passage ways.
❖
Keep the appliance area free from combustible materials, such as paper, wood, clothing, gasoline
and flammable solids, liquids and vapors.
❖
Check for unusual noise, odor and operation of the appliance.
❖
Check the vent terminal for any damage, or obstruction by plants or debris accumulation.
❖
Visually check the height and color of the burner and pilot flames.
Once a year:
❖
Remove the glass door and clean the inside of the glass with a soft, non-abrasive cloth and water or
a suitable, mild, non-abrasive cleaner.
❖
Carefully remove the logs and gently brush off any loose carbon deposits. This job is best done
outside the house, wearing a dust mask.The logs are very fragile, take care not to break them. After
cleaning, the logs must be replaced as per the instructions in this manual.
Once a year, have a qualified service technician:
❖
Completely inspect the appliance and the venting system.
❖
Clean and remove any lint accumulations or debris in the firebox, on the burners, on the pilot, at the
primary air opening, on the convection air blower and in any combustion and convection air passage
ways.
❖
Check the safety system of the gas valve.
WARNING :
All parts removed or disturbed must be properly replaced after maintenance. Service
and repair must be conducted by a qualified service person. If these instructions are not followed, a
fire or explosion may result, causing property damage, personal injury or loss of life
The exterior surfaces and glass may be cleaned with a soft, non-abrasive cloth and water or a suitable,
mild, non-abrasive cleaner.
MAIN FLAME
MAINTENANCE
CLEANING THE APPLIANCE
CAUTION: Do not conduct maintenance on the appliance while it is operating or while hot
PILOT FLAME