arcelik MD 898 KZI, Руководство пользователя

Страница: 24 / 28

Microwave Oven / User Manual
24 / 26 EN
5 Cleaning and care
•
Unplug your oven before cleaning.
• Do not use abrasive cleaners, steel wools, rough
washing clothes or abrasive chemicals such as
sulphur or chloride on or at any parts of your
microwave oven.
5.1 Outer surfaces
•
To clean the outer surfaces of the oven, first
wipe them with a soft cloth soaked in warm
soapy water. Then wipe them dry again with a
soft cloth.
•
Do not allow water ingress into the ventilation
openings in order to avoid damage to the live
parts inside the oven. Clean the control panel
of your microwave oven only with a damp and
soft cloth.
•
Do not use cleaning sprays or more soap and
water. They may cause problems in control mec-
hanism.
• To prevent accidental operation of the oven
while cleaning the control panel, keep the door
open, wipe with a damp cloth and dry with a
dry cloth immediately. Press "Stop/Cancel" key
once cleaning is over.
5.2 Keep the inside of the oven clean
•
Food particles or spilled fluids get stick to the
inner walls, gasket and door surface of the oven.
Clean these particles/fluids immediately with a
damp cloth.
•
Crumbs and splashed food absorb the micro-
wave energy, causing longer cooking durations.
Wipe the crumbs between the door and the
outer frame with a damp cloth. Clean the greasy
crumbs splashed with a soapy cloth at first, and
then with a damp one. Keep this area clean for
the door to be closed tightly.
•
Do not use cleaning agents with detergent.
• The Glass plate can be washed by hand or in a
dishwasher.
5.3 Inner surfaces
To clean the inner surfaces of the oven:
•
To soften dried stains, put a glass of water and
boil for 2-3 minutes.
• Clean the inner surfaces and ceiling with a soft
and soapy cloth. And dry again with a soft and
quite damp cloth.
•
To remove the odours inside the oven, boil
a mixture of water and a few table spoons of
lemon juice for a couple of minutes inside the
oven.
• To clean the inner base of the oven, remove the
plate and the ring.
•
Before starting the oven, install the roller ring
and the plate securely.
• When cleaning the inner surfaces of the oven
door, use a non-abrasive soft sponge or cloth.
5.4 For transportation:
• Unplug the appliance.
•
Pack the glass plate and other accessories in
a way to prevent them from breaking and mo-
ving inside the oven. Transport them separately
if needed.
• Tape the front door to the body.
•
Prevent impact against the front glass, door and
panel.
•
Transport the product in normal position. Do not
lean it aside or back.