arcelik 5060 T Скачать руководство пользователя страница 6

6    

EN

Please read the following information. 

Otherwise, there may be the risk of 

personal injury or material damage. 

Moreover, any warranty and reliability 

commitment will become void.

General Safety

•  Never place your machine on a 

carpet covered floor. Otherwise, 

lack of airflow from below of your 

machine may cause electrical parts to 

overheat. This may cause problems 

with your washing machine.

•  If the power cable or mains plug is 

damaged you must call Authorized 

Service for repair.

•  Check water hoses for wear. Do not 

use old/used water inlet hoses. These 

may cause stains on your laundry.

•  Fit the drain hose into the discharge 

housing securely to prevent any 

water leakage and to allow machine 

to take in and discharge water as 

required. It is very important that the 

water intake and drain hoses are not 

folded, squeezed, or broken when 

the appliance is pushed into place 

after it is installed or cleaned.

•  Your washing machine is designed 

to continue operating in the event 

of a power interruption. You cannot 

cancel any program by pressing 

the “On/Off button.” Your machine 

will not resume its program when 

the power restores. Press the 

“Start/Pause/Cancel” button for 3 

seconds to cancel the program (See, 

Canceling a Program)

•  There may be some water in your 

machine when you receive it. This is 

from the quality control process and 

is normal. It is not harmful to your 

machine.

•  Some problems you may encounter 

may be caused by the infrastructure. 

Press "Start/Pause/Cancel" button 

for 3 seconds to cancel the program 

set in your machine before calling the 

authorized service.

First Use

•  To prepare your machine for 

washing, carry out your first washing 

process without loading your 

machine and with detergent under 

“Cottons 90°C” program.

•  Ensure that the cold and hot water 

connections are made correctly when 

installing your machine. Otherwise, 

your laundry may come out hot at the 

end of the washing process and may 

wear out.

•  If the current fuse or circuit breaker is 

less than 16 Amperes, please have 

a qualified electrician install a 16 

Ampere fuse or circuit breaker.

•  While using with or without a 

transformer, do not neglect to have 

the grounding installation laid by a 

qualified electrician. Our company 

shall not be liable for any damages 

that may arise when the machine is 

used on a line without grounding.

•  To make your machine ready for use, 

please be sure that the tap water 

supply and water drainage systems 

are appropriate before calling the 

authorized service. If they are not, 

call a qualified plumber to have any 

necessary arrangements carried out.

Intended use

•  This product has been designed for 

home use.

•  The appliance may only be used for 

washing and rinsing of textiles that 

are marked accordingly.

•  Only detergents, softeners and 

supplements suitable for washing 

machines may be used.

•  Observe the care instructions labeled 

on textile products and any other 

instructions given by companies that 

produce detergents for your machine.

Safety instructions

•  This appliance must be connected to 

an earthed outlet protected by a fuse 

of suitable capacity.

•  The supply and draining hoses must 

2

  Warnings

Содержание 5060 T

































Отзывы: