arcelik 5060 T, Руководство пользователя

Страница: 31 / 32

31
EN
There is too
much foam.
You may not be using
proper detergent for
automatic washing
machines.
Use only automatic washing machine detergents
in your washing machine.
Excessive amount of
detergent may have been
used.
Use only sufficient amount of detergent.
Too much detergent may
have been used for a small
amount of lightly soiled
laundry.
Use only sufficient amount of detergent.
Detergent may have been
stored improperly.
Store detergent in a closed and dry location. Do
not store in excessively hot places.
Type of material being
washed (lace items will
cause excessive foam due
to their meshed structure).
Use smaller amounts of detergent for lace items.
Detergent might have
been put in the wrong
compartment.
If you put detergent in the prewash compartment
although you have not selected a prewash cycle,
the machine can take this detergent during
rinsing or softener step.
Softener being released
early.
You may have added too much softener.
The detergent dispenser might be problematic.
Water may be siphoned (pulling the softener into
the washer early) during the fill or rinse cycles.
There might be problems with the valves.
Machine does
work. No light
is on.
The plug might not be
plugged in the mains outlet. Plug should be checked.
Fuse may have blown.
Fuse should be checked.
Electricity may be cut off. Power should be checked.
The “On/Off” button might
have not been pressed.
This button must be pressed.
The machine
did not start
after the
program was
selected and
the "Start/
Pause/Cancel"
button was
pressed.
The front door may be ajar.
“Washing”
and "Start/
Pause/Cancel"
lights are
flashing after
the program is
started.
Water may have been cut
off.
You can restart your machine by pressing the
"Start/Pause/Cancel" button for a short time after
ensuring that the water is not cut off.