You can cancel the auxillary function, only by canceling the program.
11
On/Off
Auxiliary Function Selection
Program Follower
Additional Laundry
When you press the On/Off button, your machine is ready to select the desired
program. The door open led will be on and the door is ready to open. When the
desired program is selected, related spin speed can be adjusted and the duration
of the program can be observed on the display. To switch the machine off, repress
the On/Off button.
Washing can only then be started when the button is pressed.
It is not possible to activate all auxiliary functions in all wash programs. If any auxiliary function is selected, its led will be on.
It is restricted to select some auxiliary functions together. For example, if the cotton program is selected, “quick wash” and “pre-wash”
functions can not be selected at the same time. If “Pre-wash” button is selected first and the “Quick wash” function next, the led of the
pre-wash function will be off as it is not active any more.
If the machine is on, a program can be followed by means of the program follower If a washing step is over
and the next step is started, the led of the previous step will continue to light.
It means if the washing operation is finished, all related washing steps on the program follower will be on.
Pre-wash button led will be on, only if this auxiliary function is selected.
Press the Start/Cancel/Pause button. If the water level does not exceed the limitations, in 1 to 2 minutes
door open led will come on. It means the washing machine is ready to add laundry.
If door open led is not lit up after 1-2 minutes, it means the water level inside the machine is too high and it
is not allowed to open the door and add laundry. (Look at Program Cancelling).
If you change your mind as not adding laundry, press Start/Cancel/Pause button again to let the program
continue.
Pressing the On/Off button does not mean that the washing operation is started!
To start the washing, press the Start/Cancel/Pause button!