ARCC BROMPTON, Руководство пользователя, Страница: 45 / 56

Initial Bluetooth pairing
• Turn on the Bluetooth controller by pressing the power button.
• With the Bosch battery located in the e2-pod, push the battery down firmly until it clicks
and locks.
• On the Bluetooth controller press and simultaneously hold the two assist level buttons
and power mode button until the six assist level LEDs light up, then release.
• Wait for the ‘A’ LED on the e2-pod to flash three times.
• Following the three flashes the blue Bluetooth LED will illuminate on the Bluetooth
controller. This indicates that the Bluetooth pairing has successfully been completed.
Note:
you have a two minute time period to complete the pairing process. If this time
expires, turn the controller and e2-pod off and on before re-attempting.
After the initial pairing of the Bluetooth controller to the e2-pod, it will automatically connect
in subsequent operations when the e2-pod and Bluetooth are powered up together.
Charging the Bluetooth controller
Using the Micro USB to USB-C cable supplied, plug the Micro USB into the Bluetooth
controller, then the USB-C into a port on the side of the e2-pod.
The red battery LED will flash on the Bluetooth controller whilst the unit is charging. Once
fully charged the red LED will turn off.
Please note that the controller can also be charged from any USB device / wall socket using
a suitable USB cable.
Launch control:
• In order to initiate launch control, pull the brakes. The two outer assist level LEDs will
then illuminate, as well as the ‘A’ LED on the e2-pod which will flash.
• When pressure is placed on the pedal - all 6 assist LEDs along with the ‘A’ LED will
illuminate.
• As the brakes are released, the launch control mode is operated. This is indicated on
the Bluetooth controller by all six assist level LEDs flashing for the period of the boost.
• The e2-pod will deliver maximum power to the motor for a period of three seconds,
enabling an effortless get-away to be achieved for safety, when moving away from
traffic lights and crossings in heavy traffic.
Note:
the launch control function will
be cancelled if there is hesitation in
pedalling or any brake is applied.
Tip:
When the LED assistance is dialled
all the way down, so that none of the
LED indicators are lit, the e2-pod will
go into standby mode. This means that
no assistance will be given to the bike,
allowing it to be ridden as normal whilst
also saving the battery.
44