When mounting, the lamps, lampholders or cable must not sit closer than
15mm to the water level
(see illustration 13)
. Please ensure that the
lamp cables are positioned so that they cannot be damaged.
The luminaire is only suitable for indoor use, and must only be used with an
aquarium, vivarium or avairy.
The luminaire should be kept dry, ventilated and away from other heat
sources.
The controller box must be situated away from the aquarium with only the
lampholders in the vicinity of water.
Make sure that all the light from the luminaire is solely aimed into the
aquarium, vivarium or avairy. Do not allow the light to spill out, as viewing
of some lamps directly could be harmful to the human eye if viewed for
more than a few minutes.
Technical Specifications
For electrical information please refer to the rating label on the luminaire.
Double Insulation
Luminaires suitable for direct mounting on flammable surfaces
Watertight (immersible) - only lampholders, when fitted with the correct
lamp
Although the Ultra Seal® lampholders are waterproof, when correctly
assembled, they must not be submerged in water.
The controller body is IP20, and must not come into contact with water.
WARNING - Before operation, you must ensure that the lampholders are
securely fastened to your tank hood, or other part of the aquarium so that
the lamp is stable on top of the tank and cannot fall in.
Electrical installation
This unit must be protected by a suitable fuse.
Before installing, ensure that the rated voltage and frequency of the
luminaire match that of your supply, and that the mains lead plug is fully
compatible with your mains sockets. If in doubt, please return the unit to
the point of purchase to verify.
F
IP67
5
MAGNETIC CONTROLLER
UK
