Arcadia Bird Compact FBC20X, Инструкция по установке и обслуживанию

Страница: 5 / 16

The basking spot for most species of reptile, amphibian and bird when using
Arcadia branded lamps is 30-38cm (12-15”) from the lamp to the animals head.
Illustration 2.
Electrical installation
Plug the luminaire into the mains socket.
Use the switch on the mains lead to turn the luminaire on/off.
A suitable plug in timer may be used with this product, such as the Classica CAA01
or CAA02.
Trouble Shooting
Lamps strike almost immediately at nearly full brightness (dependant on ambient
temperature) and reach their operating temperature soon after. After switching the
fluorescent lamps off, they can be switched on straight away.
If the Luminaire does not light:
• Check that the mains power is connected and switched on both at the wall
(including Timer if used) and on the Luminaire.
• Check that the Luminaire plug is properly fused.
• Check that the Luminaire is rated for the same supply voltage that you are using.
• Check that the Lamps are of the correct wattage, type and length for the
Luminaire.
• Check that the lamps are installed correctly.
Maintenance Section:
Regularly check the security of all parts of your hanging mechanism or mountings.
Cleaning: Disconnect from the power supply and wait till the Luminaire is cool
before cleaning, this not only avoids smears but also reduces the likelihood of any
damage from moisture entering the Luminaire.
Both the appearance and performance of your Luminaire can benefit from regular
cleaning. A damp cloth is normally adequate to clean the body.
Spare items:
For a list of spare items available, please refer to the Arcadia Products website for
the most up to date information.
UK
3
End of Use Recycling Information
This product is covered by European Directive 2002/96/EC. Please do not
dispose of this product or replacement lamps with your normal household
waste. To safely and responsibly dispose of the product please ensure all the
components are deposited in the appropriate areas of your local civic recycling
centre. Proper disposal of this product helps to prevent potential negative
consequences for the environment and human health.
All electronic components (this includes the power supply and the lamp holder)
should be placed in the electronic waste recycling area.
If a fluorescent lamp is provided with this product it contains mercury, and
cannot be disposed of with normal household waste; it should be deposited in
the fluorescent lamp recycling area at your local civic recycling centre or taken
to any approved recycling point for fluorescent lamps.