5692 FRESCA DRIVE, LA PALMA, CA 90623 | 800.585.5957 | ARCADIACONTRACT.COM
CO-OP ASSEMBLY INSTRUCTIONS – MODEL 6513-65TS
Hardware Included:
[A] ¼-20 x 1” hex bolt (7)
[B] ¼-20 x .75” decorative screw (4)
[C] 5/16-18 x 1.5” hex bolt (1)
[D] 5/16-18 x 2” hex bolt (4)
[E] 2” wood screws (6)
[F] 3/8 x 5” anchor bolts (4)
IMPORTANT – HARDWARE IS SPECIFIC FOR THE ASSEMBLY OF EACH COMPONENT. MAKE SURE THE
CORRECT ITEMS ARE USED AS DIRECTED AND IDENTIFIED BELOW.
Step 1: Remove the back cushions on the seating units by gently applying upward force to release it from the
z-brackets that are holding it in place (Figure A).
Step 2: With the back removed, slightly tilt the back of the seat cushion upwards, approximately 45-degrees,
and pull until it comes out (Figure B).
continued next page
FIGURE A
FIGURE B
[A]
[B]
[C]
[D] [E] [F]
