ARCA 827S.E Series, Руководство по эксплуатации, Страница: 20 / 42

7 Assembly ARCA Regler GmbH
20 / 42 Series 827S.E/X 09.2019 / 1.0
16
9
8
Illustration 6: Mounting the signal box on the actuator
7.2.2 Mounting with mounting kit "Linear actuator IEC 60534"
Included with the mounting kit "Linear actuator IEC 60534", stroke 3 to
35 mm, are (see figures below for serial numbers):
Serial
no. No. of
items Name Note
1 1 Driver pin cpl. with
roller mounted on lever (2)
2 1 NAMUR lever For stroke range 3 mm to 35 mm,
or (order separately for stroke
range > 35 mm to 130 mm, see
Fig. 10)
3 2 Washer B 6.4 - DIN 125 - A2
4 3 Spring lock washer A6 - DIN 127 - A2
5 3 Cylinder screw M6 x 25 - DIN 7984 - A2
6 1 Hex nut M6 - DIN 6923 - A2
7 1 Square nut M6 - DIN 557 - A4
9 6 Spring lock washer A8 - DIN 127 - A2
17 1 NAMUR mounting
bracket IEC 534 Standardised connecting location
for mounting bracket with rib,
column or flat surface
18 1 Sensing hoop Guides the roller with the driver
pin and turns the lever arm
19 2 Clamping piece Assembly of the sensing hoop to
the actuator's stem
20 2 U-bolts Only for actuators with columns
21 2 Hex screw M8 x 16 - DIN 933–A2
22 6 Washer B 8.4 - DIN 125 - A2
23 4 Hex screw M8 x 20 - DIN 933–A2
24 4 Hex nut M8 - DIN 934 - A4
Mounting procedure (see
figures below) 1. Fig. 9: Assemble the clamping pieces (19) using the cylinder screws
(5) and spring lock washers (4) to the actuator stem.