14
Issue date: 05/02/2020
6. Delay Off Timer Setup
You may choose the entry sensor to operate normally as an ON/OFF trigger or
have the extra benefit to set up delay off timer.
Factory pre-setting
will be at ‘0’ minute position.
Set up delay off timer:
•
There are 4 timer selections, 0 minute
– 1 minute – 5 minutes – 10 minutes
•
Adjust rotary switch clockwise to the minutes that you wish to setup.
•
If you set at
‘0’ minute, the entry sensor will immediately trigger receiver
device when magnetic sensor is separated or closed.
•
If you set at ‘1’ minute / 5 minutes, / 10 minutes the entry sensor will
immediately trigger receiver device then delay timer will start to countdown
until it reaches 0 minute then sends signal to the receiver device.
DELAY OFF TIMER SETUP
