11
Issue date: 05/02/2020
5. Pairing / Un-pairing Device
P
AIRING
/
U
N
-P
AIRING
Refer to the relevant receiver operation manual that you wish to control for
detailed pairing / un-pairing procedure.
With the
receiver that you intent to use, enter into “Learning Mode”
2 Methods of pairing / un-pairing:
Method 1.
To Pair:
1.
With the receiver enter into “Learning Mode”
2. On sensor, delay timer must be positon in
‘0’ minute and function switch to
“ON’ position. (LED on module will flash once)
3. Sensor will then trigger to pair receiver device.
Un-Pair:
1.
With the receiver enter into “Learning Mode”
2. On sensor, delay timer must be position in
‘0’ minute and function switch to
“OFF’ position. (LED on module will flash twice)
3. Sensor will send trigger to un-pair receiver device.
PAIRING / UN-PARING DEVICE
