CHANGING BATTERY:
Transmitter
Unclip the front cover from the front of the Transmitter (bell push unit) using a small screw driver.
Remove the battery and replace using a new “CR2032” battery, making sure the polarity is correct.
Replace the front cover making sure the clips are correctly aligned and firmly push the case together.
SPECIFICATION
RECEIVER:
Frequency: 433.92MHz
AC current input: 220-240V AC/50Hz
Ringtone : 5 kinds of sound
Sound volume: High – Medium – Low – Mute
Memories: 4 codes
Receiving distance: 30 meters (in open field)
Standby power: Below 1W.
TRANSMITTER (LMLT-711):
IP-44 weatherproof approved.
Battery: CR2032 (included)
FAULT FINDING
No Activation: Check the battery level and polarity, replace with new fresh battery if necessary.
Whether 4 memories are full and cannot set another code if code setting has been successful.
