ARC Flex Mini, Инструкция по эксплуатации

Страница: 14 / 18

Flex Mini Instruction Manual
November 2015
Page 13 of 17
WALL
WALL
Secure the mounting bracket to the wall or equipment via two screws (not provided with the
system). Slide down the receiver along the guided track to secure the receiver to the
mounting bracket (see below). Make sure the screws are tightened after installation.
→
Remove the receiver by pressing down the bracket release and pull the receiver upward
until it clears the guided track (see below).
Remove the two components shown on the right with
arrows pointed to them when 380~400VAC or
410~460VAC power transformer is used.