Before you use the CDL 900 unit, you need the following:
♦
A host PC with terminal program like Hyper terminal, Procomm etc
♦
M
obile
I
dentification
N
umber (MIN) provided by your Cellular service provider. MIN is
your cellular phone number.
♦
S
ystem
ID
(SID) information (from your cellular service provider) SID uniquely
identifies your cellular service provider.
Registering the CDL 900 Unit
To register your CDL 900 unit, do the following:
1. Contact your cellular service provider
2. Provide the cellular operator with the ESN (
E
lectronic
S
erial
N
umber) number located
on the label at the top of your unit.
3. Inform the cellular operator that the unit is an AMPS Analog unit with a power rating of
class 3 (power 600 mw).
The cellular operator will register your unit and provide you the following information:
a)
MIN (Mobile Number) Number:
b)
System preference: A or B
c)
SID (System ID)
It is recommended that you note the MIN and SID on the label at the top of the unit.
Starting and configuring the CDl 900 unit
The CDL900 is configured as a DCE (e.g. modem). It communicates with a PC through
the serial (RS 232) port.
Antenna
TR TX MR RX PWR
3.5”
DIP Switch
Power Supply
DB 9 (F)
6.0”
TR = Terminal Ready
TX = Transmit Data
MR = Modem Ready
RX = Receive Data
PWR = Power
