ARC AR90S, Руководство пользователя

Страница: 6 / 10

11
10
“ I”:Between 10minutes and 120 minutes .
At the end of the programmed length of time, the timer will sound and automatically turn off the oven.
5-keys timer procedure baking mode (only available on certain models)
Settings
After pressing a function button, the required time can be set via the +/- keys. For quicker regulation, keep the
required key pressed. By pressing the function key and then releasing it, the pre
-
selected function appears on the
display and remains for 5 seconds during the time the setting can be performed (with one hand).Five seconds after
releasing the function key or finishing the setting, the display returns to the clock. Any program set will start
immediately. Program selection is accompanied by the surrounding of a buzzer.
Setting the time(clock)
Select the clock function by simultaneously pressing the Duration(2)and End of Cooking (3) time keys and adjust
the clock by means of the +/-
（
4+5
）
keys. All the Programs set will be cancelled and relay will switch off.
Manual operation
Simultaneously press the Duration (2) and End of cooking (3) time keys (the auto symbol will be cancelled): the
saucepan symbol will light up. Any program set will be cancelled.
Semi automatic operation and cooking duration
Press the Cooking duration (2) key and set the duration by means of the +/- (4+5) keys. The saucepan symbol will
appear.
The relay output will be activated.
If clock=end of the cooking time, the relay and saucepan symbol will be off. The buzzer will sound and symbol A
will blink.
Semi automatic operation and end of cooking time
Press the end of cooking time key (3) and set the required time by means of the +/- (4+5) keys. The symbol A and
the symbol of the saucepan will light up. The relay output will be activated.
If clock=end of the cooking time, the relay and saucepan symbol will switch off. The buzzer will sound and the
symbol A will blink.
Completely automatic operation
Press the duration key (2) and set the required time by means od the +/- keys(4+5). The symbol A will appear. The
relay will come on the saucepan symbol will appear. Select the End of cooking time function (3)- the minimum
setting time will appear. Set the required time by means of the +/- keys (4+5).
The relay and the saucepan symbol. The saucepan symbol will re-appear when the clock time=the calculated
switch on time. After setting the automatic program the symbol A will blink. The buzzer will sound and the
saucepan symbol and relay will switch off.
Minute control
Press the Minute control key (1) and set the required time by means of the +/- keys (4+5). While the set time runs,
the bell symbol will appear.
When the set time elapses, the buzzer will sound.
Buzzer
The buzzer remains active for 7 minutes after the minute control cycle or the cooking program has finished
press any function key to stop the buzzer.
Program start-up and check
A set program is run when the required time has also been set. The remaining timers can be checked at any time
by selecting the relevant function.
Setting error
The setting is not correct if the clock time is between the beginning of the cooking time and the end of the
cooking time.
The error is indicated via sounding of a buzzer and blinking of the Auto symbol.
An incorrect setting can be corrected by re-setting either the beginning or end of cooking time.
3 2 1
Cancelling a program
A program can be cancelled by selecting the manual function. A set program is automatically cancelled when it
reaches the end of its cycle.
The oven light
Set knob “B”to the symbol to turn it on .It lights the oven and stays on when any of the electrical heating
elements in the oven come on.
Cooling ventilation
In order to cool down the exterior of the appliance, this model is equipped with a cooling fan, which comes on
automatically when the oven is hot.
When the fan is on, a normal flow of air can be heard exiting between the oven door and the control panel.
Note: When cooking is done, the fan stays on until the oven cools down sufficiently.
How to Keep Your Oven in Shape
Before cleaning your oven, or performing maintenance, disconnect it from the power supply.
To extend the life of your oven, it must be cleaned frequently, keeping in mind that:
· the enameled or stainless steel parts should be washed with lukewarm water without using any abrasive
powders or corrosive substances which could ruin them ;Stainless steel could get stained .If these stains are
difficult to remove, use special products available on the market. After cleaning, it is advisable to rinse thoroughly
and dry.
· the inside of the oven should preferably be cleaned immediately after use ,when it is still warm ,with hot water
and soap ;The soap should be rinsed away and the interior dried thoroughly. Avoid using abrasive detergents (for
example cleaning powders, etc) and abrasive sponges for dishes or acids (such as lime scale –remover, etc…) as
these could damage the enamel .If the grease spots and dirt are particularly tough to remove, use a special
product for oven cleaning, following the instructions provided on the packet. Never use a steam cleaner for
cleaning inside of oven.
· if you use your oven for an extended period of time ,condensation may form .Dry it using a soft cloth.
· there is a rubber seal surrounding the oven opening which guarantees its perfect functioning .Check the
condition of this seal on a regular basis .If necessary, clean it and avoid using abrasive products or objects to do so.
Should it become damaged, pleas e contacts you’re nearest After -sales Service Center .We recommend you avoid
using the oven until it has been repaired.
· never line the oven bottom with aluminum foil ,as the consequent accumulation of heat could compromise the
cooking and even damage the enamel .
· clean the glass door using non-abrasive products or sponges and dry it with a soft cloth .
How to Remove The Oven door
For a more thorough clean, you can remove the oven door. Proceed as follows:
· Open the door fully ;
· Lift up and turn the small levers situated on the two hinges ;
· Grip the door on the two external sides ,shut it slowly but not
Completely;
· Pull the door towards you ,pulling it out of its seat ;
Reassemble the door by following the above procedures backwards.
Replacing the Oven Lamp
WARNNING: Ensure that the appliance is switched off before replacing the lamp to
avoid the possibility of electric shock
·
Disconnect the oven from the power supply by means of the omni polar switch used to connect the appliance to
the electrical mains ;or unplug the appliance if the plug is accessible ;
· Remove the glass cover of the lamp-holder ;
· Remove the lamp and replace with a lamp resistant to high temperatures (300
℃
)with the following
characteristics:
Voltage: 220-240V
Wattage: 25W
Type: E 14
· Replace the glass cover and reconnect the oven to the mains power supply .