LWO Corporation
3841 N. Columbia Blvd.
Portland, Oregon 97217
(503) 286-5372
(800) 459-8718
I N S T A L L I N G T H E A R B O R
A T T A C H T H E C A P P I E C E S
STEP 5
Center one of the cap pieces across the two
headers, placing it between the two marks.
Center one screw hole on top edge of header.
Secure cap to second header in same manner.
Using spacer provided, attach other cap pieces
at equal intervals, 3 boards on each side of the
center one.
Arbor post
Anchor
Soil
Concrete
Attach all four anchors to the bottom of the arbor using the
provided screws, two screws per anchor, staggering the
screws.
Measure the distance in between all anchors and dig four 8”
diameter holes to accommodate the anchors.
Carefully lift the arbor and position in place, avoid tilting
the arbor on the anchors.
Plumb and level the arbor.
Mix concrete according to the manufacturer's instructions,
fill each hole within 1/4” of the bottom of each post, posts
should not be set in the concrete.
This arbor may be secured using a variety of techniques. These include attach-
ing to an existing structure or anchoring with gravel or river rock instead of
concrete. The instructions below represent secure mounting with concrete. Use
caution when moving the arbor to its final placement. Two people are required
to lift or move the arbor.
1
2
3
4
5
STEPS
