1
2
3
4
P L E A S E R E A D C O M P L E T E L Y B E F O R E Y O U B E G I N A S S E M B L Y
Rosedale Arbor
A S S E M B L Y I N S T R U C T I O N S
2
2
2
2
P R E L I M I N A R I E S
T O O L S Y O U W I L L N E E D
•
Power screwdriver or drill that accepts interchangeable
bits*
•
Two bags of concrete mix (60#) to anchor the arbor
*
A bit holder may be needed if using a drill with a quick-change chuck.
If you wish to stain or paint your arbor, we recommend that you do so before assembly, it makes the job eas-
ier. Use a high quality exterior stain or paint. Be careful not to cover up guide marks on top of headers.
IF YOU PLAN TO
HANDY TO HAVE
•
Tape measure
•
Carpenters Square
•
Stool or short ladder
WORK AREA
Select an area close to where the arbor will be finally placed. While the assembled unit is not very heavy, it is
awkward to move far and requires two people to do so easily.
The assembly area should be relatively flat and open, at least 8’ square. A lawn, driveway or wide path will be
satisfactory.
It is a good idea to lay out the arbor box on your work surface to protect the arbor from nicks and scratches.
445.35.98 4/27/2007
Trellis Caps (7)
Headers (2)
Braces (4)
Lattice Side Panels (2)
1
2
3
4
HARDWARE
- 2 1/2” Wood screws (30)
- Driver bit
(if other than Phillips head)
- Wood block marked “spacer” (1)
- Anchoring kit
CHECK BOX FOR THESE CONTENTS
Win FREE Arboria Products
Win FREE Arboria Products
Win FREE Arboria Products
Win FREE Arboria Products
Give us feedback about this Arboria product and be entered into a drawing to win Arboria goods. It’s easy, go to
www.Arboria.com, choose a product then click on the link to review
review
review
review. Be sure to enter your email and telephone so
that we may contact you if you win. Upload a photograph for an extra chance to win.
Upload a photograph for an extra chance to win.
Upload a photograph for an extra chance to win.
Upload a photograph for an extra chance to win.
Visit www.Arboria.com for offi-
cial rules. No purchase necessary.
