01945 410950
http://www.arborgardensolutions.co.uk
Trading address: Unit 11, Cattle Dyke, Wisbech, England, PE1 34NR
Step 5
Step 6
Step 7
Step 8
Now take the front bar and secure it with the
60mm screws as shown in the picture. Please don’t
forget to use the space bar (70cm) between the
posts to ensure that the gap is correct.
Carefully lay the assembly on its back and position
the metal bar as shown across the bottom of the
front posts. Use spacing block (70cm) on both slots
as shown to ensure the gap is the right size.
Place the roof batten section onto the store and
align with the edges of the posts. Secure with
provided 85mm screws.
Place the roofs sections onto the store and align to
the rear batten.
Please note: One lid out of three is
smaller. Make sure it is fixed on a middle section.
