01945 410950
http://www.arborgardensolutions.co.uk
Trading address: Unit 11, Cattle Dyke, Wisbech, England, PE1 34NR
Step 1
Step 2
Step 3
Step 4
Stand the left-hand end panel upright on a flat,
level surface.
Arrange the 2 spacer blocks on the ground,
adjacent to the end panel, as shown in the photo
above. Using the 65mm screws provided, attach the
batten on the back panel to the post of the end
panel, ensuring that the batten remains vertically
aligned to the post fixing.
Now secure the right-side panel in place with 65mm
screws in the same manner as you attached the left
side panel. Repeat steps 1-3 to complete the rest of
the wheelie bin slots.
After attaching the last right-side panel, your
assembly should look like the one in the picture.