Arbor Technology PC1017, Руководство пользователя

Страница: 30 / 30

- 16 -
Using the Terminal
The barcode scanner of the terminal starts to operate right after the terminal
boots into system.
To scan a barcode, position the barcode within the red light area. Aim the
barcode at the red dot for accuracy. On a successful read, the beam dies out. If
the scanner fails to read to barcode within about 4 seconds, the beam dies out
and the scanner attempts to read again after 2~3 seconds.
If you did not get a good read, make sure the barcode is within the effective
reading distance according to the barcode type. Refer to 1.6 Barcode Scanner
Specifications for the depth of scan fields.