Arbor Technology Gladius G1050 Series, Руководство пользователя

Страница: 10 / 137

- viii -
Preface
10. Remove dirt with a lightly moistened cloth and a mild solvent detergent. Then wipe
the cabinet with a soft dry cloth.
11. The openings on the enclosure are for air convection and protect the equipment from
overheating. DO NOT COVER THE OPENINGS.
12. Position the power cord so that people cannot step on it. Do not place anything over
the power cord.
13. If the equipment will not be used for a long time, disconnect it from the power source
to avoid damage by transient overvoltage.
14. Never pour any liquid into openings. This may cause fire or electrical shock.
15. Never open the equipment. For safety reasons, the equipment should be opened
only by qualified service personnel.
16. If one of the following situations arises, get the equipment checked by service
personnel:
a. The power cord or plug is damaged.
b. Liquid has penetrated into the equipment.
c. The equipment has been exposed to moisture.
d. The equipment does not work well, or you cannot get it to work according to the
user’s manual.
e. The equipment has been dropped or damaged.
f. The equipment has obvious signs of breakage.
17. The sound pressure level at the operator’s position, according to IEC 704-1:1982, is
no more than 70dB(A).
18. Keep this User’s Manual for later reference.
19. DO NOT LEAVE THIS EQUIPMENT IN AN UNCONTROLLED ENVIRONMENT
WHERE THE STORAGE TEMPERATURE IS BELOW -20° C (-4° F) OR ABOVE
60° C (140° F). THIS MAY DAMAGE THE EQUIPMENT.
Warning
Any changes or modifications not expressly approved by the guarantee of this device
could void the user’s authority to operate the equipment.
General Cleaning Tips
You may need the following precautions before you begin to clean the device. When you
clean any single part or component for the device, please thoroughly read and understand
the details below.
1. We strongly recommended that you should shut down the system before you start to
clean any single components.
2. When you need to clean the device, please rub it with a piece of dry cloth.
3. Be cautious of the tiny removable components when you use a vacuum cleaner to
absorb the dirt on the floor.
4. Never drop the components inside the device or get circuit board damp or wet.
5. Be cautious of all kinds of cleaning solvents or chemicals when you use it for the sake
of cleaning. Some individuals may be allergic to the ingredients.