manualshive.com logo in svg

Arbor Technology FPC-8100 Series, Руководство пользователя

Поделиться
Скачать
Arbor Technology FPC-8100 Series Скачать руководство пользователя страница 64

- 52 -

Installation & Maintenance

2.  Once the screw is removed, open the door. The CFast slot then comes 

to view.

3.  Position the CFast card as directed by the graphic printed on the front 

panel. Insert the CFast card all the way into the slot.

To uninstall the CFast card:

1.  Loosen and remove the card door screw and open the card door.

2.  Push-eject the CFast card.

3.  Remove the CFast card.

4.  Refasten the screw to close the card door.

Note: Make sure to refasten the screw to close the card door each time the 

CFast card is installed or uninstalled.

4.1.8.

 

Install/uninstall SIM Card

This section will use FPC-810X as the example to guide you through the SIM 

card installation steps:

1.  Remove the top cover from the computer as described in 

4.1.1.2. Remove 

Top Cover on page 34.

2.  Locate the SIM card slot on the main board. 

Содержание FPC-8100 Series










































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды