2. Press the ENTER key and the display should allow you to change the time zone provided by
the IRIG-B time signal. Choices include UTC or Local. IRIG-B local time is offset according
to your choices in the Local Offset and Daylight Saving Time menus.
SELECT UTC OR LOCAL
IRIG DATA TIME = UTC
3. Press the UP or DOWN key to select for either UTC or Local time zone and press the ENTER
key. The display should now indicate the IRIG IEEE 1344 setting choices.
IRIG-B IEEE 1344
1344:
OFF
4. Use the UP or DOWN key to turn the IRIG IEEE 1344 feature ON or OFF, and press
the ENTER key. With the IEEE 1344 setting ON, the IRIG-B will send out additional
time-related information, including the year and time quality. However, not all devices can
interpret the extra data supplied with IRIG IEEE 1344 turned ON.
Configuring the Model 1088B
To configure Model 1088B through the serial port requires using a null-modem cable and terminal
program, like HyperTerminal, Putty, or Tera Term Pro
1
. Configuring through the serial port is
beyond the scope of this Quick Setup Guide and requires information provided in the operation
manual. Specifically, commands to configure these models are found in
Serial Communication and
Command Set
of the operation manual, as are the null-modem cable connections.
Additional Help
For complete details concerning the setup and operation of these models, please go to the Arbiter
website (www.arbiter.com) and download the operation manual from the Model 1088B product
page. Also, a printed manual is available for purchase. See contact information for Arbiter Sys-
tems
2
.
Document No. PD0052600A
1
Tera Term Pro is available for download on the Arbiter website under Downloads.
2
Arbiter Systems, Inc.
·
1324 Vendels Circle Suite 121
·
Paso Robles, CA 93446
·
USA
·
1.805.237.3831
·
1.800.321.3831
·
E-mail: [email protected]
·
·
Internet: www.arbiter.com
4
