Arbiter Systems 1073A, Руководство по эксплуатации

Страница: 14 / 31

2 General Information
1.3 Options
The Model 1073A allows for installation of options, which can enhance various aspects of perfor-
mance and features. The following is a list of available options.
1.3.1 Option 01, Fiber Optic Input for Channel A
Provides a fiber-optic input (channel A only) with ST connector and 820-nm receiver compatible
with multi-mode fiber (62
. 5 / 125 µm
2
, also usable with 50 / 125 µm
2
, 100 / 140 µm
2
, and 200 µm
2
).
Accepts -25.4 to -9.2 dBm for +5V logic level and < -40 dBm for 0 V logic level for dc to 5 MHz.
1.3.2 Option 04, On/Off Switch
Provides a line switch on the front panel.
1.3.3 Option 07, IEC-320 Power Inlet, 85 – 264 Vac, 110 – 275 Vdc
Provides an AC/DC power module which includes an IEC-320 type inlet and mating cordset. Input
voltages are: 85 – 264 Vac, 47 – 440 Hz or 110 – 270 Vdc, 3 VA typical. Various cord sets, by
country, are available as Options P01 through P10 as seen in Table 1.1 below.
No. Country Specification Rating
P01 Continental Europe CEE 7/7 220V
P02 Australia, NZ, PRC AS3112-1981 240V
P03 U.K. BS 1363 240V
P04 Denmark Afsnit 107-2-01 240V
P05 India BS 546 220V
P06 Israel SI 32 220V
P07 Italy CEI 23-16/VII 1971 220V
P08 Switzerland SEV 1011.1959 220V
P09 North America and ROC NEMA 5-15P CSA C22.2#42 120V
P10 Japan JIS8303 120V
Table 1.1: Available IEC-320 Cordsets by Country
1.3.4 Option 08, 10 – 60 Vdc Terminal Power Strip, Surge Withstand
Provides input surge protection (SWC) for compliance with ANSI C37.90-1 and IEC 801-4. Input
voltages are: 10 – 60 Vdc, 3 W typical. Utilizes a 3-pole terminal strip for power inlet.
1.3.5 Option 10, 110 – 275 Vdc, Terminal Power Strip, Surge Withstand
Provides input surge protection for compliance with ANSI C37.90-1 and IEC 801-4. Input voltages
are: 85 – 264 Vac, 47 – 440 Hz, or 110 – 270 Vdc, 3 VA typical. Utilizes a 3-pole terminal strip for
power inlet.