3 Installing the Air Locker
14
Examine the bearing cups and cones from Figure 7. for damage or
wear. If necessary, discard and replace with the same size and
type of bearing.
Figure 7.
Using a caliper or similarly accurate measurement method
(i.e., able to take accurate measurements within 0.04mm [0.0015”]),
measure the distance from the shoulder of the bearing journal to
the ring gear mounting face (shown as ‘
A
’ in Figure 7.) and record
this measurement as ‘
A
’.
Measure the thickness of the factory shim removed from the end of
the differential carrier (shown as ‘
B
’ in Figure 7.) and record this
measurement as ‘
B
’.
FACTORY DIFFERENTIAL
