20/08/2014
Page 2 of 15
Fitting instructions# 3789248
Copyright © 2005 by ARB Corporation Limited. All rights reserved, this document must not be reproduced without the express authority of ARB Corporation Ltd
GENERAL CARE AND
MAINTENANCE
By
choosing an ARB Bar, you have bought a product that is one of the most sought after 4WD products
in the world. Your bar is a properly engineered, reliable, quality accessory that represents excellent
value. To keep your bar in original condition it is important to care and maintain it following these
recommendations:
Prior to exposure to the weather your bar should be treated to a Canuba based polish on all
exposed surfaces. It is recommended that this is performed on a six monthly basis or following
exposure to salt, mud, sand or other contaminants.
As part of any Pre Trip Preparation, or on an annual basis, it is recommended that a thorough visual
inspection of the bar is carried out, making sure that all bolts and other components are torqued to
the correct specification. Also check that all wiring sheaths, connectors, and fittings are free of
damage. Replace any components as necessary. This service can be performed by your local
authorized ARB Stockist.
FITTING REQUIREMENTS
REQUIRED TOOLS FOR FITMENT OF PRODUCT:
METRIC SOCKET SET
METRIC RING AND OPENEDED SOCKET SET
ELECTRIC DRILL 13MM CAPACITY
10MM DRILL BITS
RUST INHIBITING PAINT
PHILLIPS AND FLAT BLADE SCREW DRIVER
TAPE MEASURE
HYDRAULIC LIFTING PLATFORM OR
ANOTHER PERSON.
SHARP CHISEL AND PLASTIC CUTTING SAW
TORQUE WRENCH
HAVE AVAILABLE THESE SAFETY ITEMS WHEN FITTING PRODUCT
:
Protective eyewear
Hearing protection
NOTE: ‘WARNING’ notes in the fitting procedure relate to OHS situations, where to avoid a
potentially hazardous situation it is suggested that protective safety gear be worn or a safe work
procedure be employed. If these notes and warnings are not heeded, injury may result.
FASTENER
TORQUE SETTINGS:
SIZE
Torque Nm
Torque lbft
M6
9Nm
7lbft
M8
22Nm
16lbft
M10
44Nm
32lbft
M12
77Nm
57lbft
ARB INTENSITY LIGHTS, UP TO 900 SERIES ROUND OR 800 RECTANGULAR IPF DRIVING OR FOG
LAMPS SUIT THIS PRODUCT
BAR IS DESIGNED TO ACCOMMODATE WARN ZEON 12 AND WARN 16.5TI WINCHES
