20/08/2014
Page 10 of 15
Fitting instructions# 3789248
Copyright © 2005 by ARB Corporation Limited. All rights reserved, this document must not be reproduced without the express authority of ARB Corporation Ltd
34. If not installing a winch, place the grille panel
in from behind the bar and fasten with the 6
M8 bolts, washers and flange nuts.
35. Before fitting the wings to the centre section,
the vehicles fog light loom needs to be
modified to suit the ARB fog lights.
Using a sharp chisel, cut out rib from plug.
Place plug sideways on bench and slice out
the rib as shown.
ALLWAYS CUT AWAY FROM YOUR
HANDS
Check loom fits ARB Fog light plugs. If not
more will need to be trimmed from rib.
36. Insert the fog lights into the wing from the
front, locating into the three positions as
shown.
