Battery
Conditioning a new battery
Before you use a battery pack for the first time, there is a conditioning process that you should follow:
1. Connect the Charger and fully charge the battery.
2. Turn on the device and complete setting up the operating system.
3. Disconnect the charger/adapter.
4. Operate the device using battery power.
5. Reconnect the Charger and fully charge the battery again.
6. Follow these steps again until the battery has been charged and discharged three times.
Use this conditioning process for all new batteries, or if a battery hasn't been used for a long time
The battery conditioning process ensures your battery accepts the maximum possible charge.
Failure to follow this procedure will prevent you from obtaining the maximum battery charge,
and will also shorten the effective lifespan of the battery. In addition, the useful lifespan of the
battery is adversely affected by the following usage patterns:
Using the device on constant AC power. Not discharging and recharging the battery to its
extremes, as described above. Frequent use; the more you use the battery, the faster it will reach
the end of its effective life.
How to check battery percentage
There is a battery indicator on the front side of device, press the battery indicator button, you
can see the battery percentage on the digital tube:
The battery indicator should work independently regardless of whether the device is turned on or
off, or even disconnected from the charger.
