Network Dome Camera·
Quick Start Guide
22
22
3
Setting the Network Camera over the
LAN
To view and configure the camera via LAN (Local Area Network), you
need to connect the network camera in the same subnet with your
PC. Then, install Xyclop CCTV client software to search and change
the IP address of network camera.
The following figure shows the cable connection of network camera
and PC:
Wiring over LAN
Set the IP address of the camera for accessing via LAN.
Steps:
1.
Use Xyclop CCTV client software to detect the online devices.
Please refer to the user manual of Xyclop CCTV client software for
detailed information.
Search online devices automatically
After launch Xyclop CCTV software, it automatically searches the
online devices every 15 seconds from the subnet where your
