11
To replace the right chinstrap cover (long side), ensure the cap side of the
chinstrap end snap (Arai logo impressed) on the chinstrap and the leatherette
side of the chinstrap cover both face outward, slip the chinstrap cover onto the
chinstrap
③
.
TO REMOVE/REPLACE NECKROLL
To remove, pull out the neckroll end tabs, which are
inserted into the chin center pad at both sides .
Grasp center of the neckroll firmly .
To wash the neckroll, put it into lukewarm water with small amount of laundry
soap or your own shampoo and wash gently by hand. Rinse well with fresh water
and wipe off with a soft cloth. Dry it in the shade at ambient temperature.
WARNING:
Never use petrol, thinner, benzene or any other solvents.
Further insert the frame
so that the 3 tabs on the
frame are locked in the
slot of the helmet
.
Replace the neckroll end
tabs , and replace the
cheekpads
Position the plastic chinstrap anchor cover over
the steel anchor and push the cover in the anchor
until the tab on the back of the cover snaps fully
home
④
.
Rotate it to either direction by 3cm – 4cm (1-1/4”
– 1-1/2”)
.
Remove it from the helmet .
To replace, insert the neckroll frame into the slot of the helmet . Centering the
neckroll on the helmet .
First remove the cheekpads as per previous instructions.
③
④
