7
2.3
Electric connections
The Orion flowmeter has been designed to be connected to ARAG devices (computers, screens,
displays) but can also be connected to equipment made by other manufacturers as long as they
are designed for flowmeters of this typology.
ARAG is not liable for damage to the system, persons, animals or things caused by
incorrect or inadequate installation of the flowmeter.
In the event of damage to the flowmeter, caused by incorrect or unsuitable assembly,
any form of guarantee is automatically rendered null and void.
The connections of the Orion flowmeter on devices not provided by ARAG are indicated in tables
3a and 3b.
There are two different types of flowmeter connectors:
STANDARD CONNECTOR (ORION Code 462xAAxxxxx)
Colour
Position
Connection
Black
1
GND
Red
2
+12 VDC
Green
3
Signal
(square wave)
DEUTSCH
®
CONNECTOR (ORION Code 4622AB61717)
Colour
Position
Connection
Green
1
Signal
(square wave)
Black
2
GND
Red
3
+12 VDC
2.4
Hydraulic connections
For connection to the system, use appropriate fittings (Ref. ARAG General catalogue).
Avoid bends and constrictions before connections and on tubes.
Regarding connections, use tubes and fittings properly sized for the operating pressure of
the system.
The tightening of hose tails should be made with special metal clamps ensuring perfect
sealing even at high pressures.
The connection by means of threaded fittings should be done taking operating pressure
into account.
CAUTION: For the implementation on already operating systems it is necessary to
follow all safety rules described herein. System assembly and start-up must be carried out
by expert personnel according to the safety rules so as to ensure the same safety level of
the system the flowmeter is going to be installed in.
Fig. 6a
Tab. 3a
Fig. 6b
Tab. 3b
