39
DATA AND SETTINGS
12.7.4
System settings
1
2
Fig. 81
1
This function acts on OP job screen loading mode, so as to make its displaying easier.
Take into account that screen loading differs based on the used VT.
- Function OFF
After having connected the ECU to tractor, main screen loading is started only when the
special VT key* is pressed.
- Function ON
After having connected the ECU to tractor, main screen is pre-loaded on system: as soon
as the special VT key* is pressed, loading has already been completed and screen is
displayed without any waiting time.
* Key used to display ISOBUS sprayer management application.
2
Enables/disables simulation mode (mainly used for demonstrative purposes, training,
etc.)
12.7.5
Registration
Should it be necessary to re-enter the registration code supplied with the ECU, proceed as follows.
REGISTRATION
1
Press to enter registration code.
2
Type in the code and confirm with key
3
.
2
3
1
Fig. 82
Quits without confirming the
changes
Saves the changes
Delete
Quit
Confirm
Goes back to previous menu,
or scrolls the pages of a menu
(previous page)
Scrolls the pages of a menu
(next page)
Goes back to Main screen
Saves the changes to current
page
